Dynomotion

Group: DynoMotion Message: 14361 From: Wcarrothers Yahoo Date: 1/22/2017
Subject: Confirm on exit
  My 3rd dynomotion machine I'm running a lot already and with the kmotion Cnc interface.  (Yes I some times scratch my head why I run Mach overlay on my other dynomotion machine.)

But my 3 Ed dynomotion machine is seeing a lot of use already.  In alt tabing between screens I shut down the interface.  

So question is.  Is there a confirm on exit option some where for the kmotion program to prevent accidental closing?  

Thanks
Group: DynoMotion Message: 14362 From: Wcarrothers Yahoo Date: 1/22/2017
Subject: Re: Confirm on exit
And yes I see the program exit option but of course those are cool options I just want a dialog to yes or no exit of the program so I can decide I didn't want to exit and go back in. 

B



On Jan 22, 2017, at 5:37 PM, Wcarrothers Yahoo wcarrothers@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:

 

  My 3rd dynomotion machine I'm running a lot already and with the kmotion Cnc interface.  (Yes I some times scratch my head why I run Mach overlay on my other dynomotion machine.)

But my 3 Ed dynomotion machine is seeing a lot of use already.  In alt tabing between screens I shut down the interface.  

So question is.  Is there a confirm on exit option some where for the kmotion program to prevent accidental closing?  

Thanks
Group: DynoMotion Message: 14365 From: Tom Kerekes Date: 1/23/2017
Subject: Re: Confirm on exit
Hi Bill,

I suppose we could add that. Its just a pain when you really want to exit. 

How is it that alt-tab exits?  That should just switch processes. 

Regards

TK

On Jan 22, 2017, at 2:41 PM, Wcarrothers Yahoo wcarrothers@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:

 

And yes I see the program exit option but of course those are cool options I just want a dialog to yes or no exit of the program so I can decide I didn't want to exit and go back in. 

B



On Jan 22, 2017, at 5:37 PM, Wcarrothers Yahoo wcarrothers@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:

 

  My 3rd dynomotion machine I'm running a lot already and with the kmotion Cnc interface.  (Yes I some times scratch my head why I run Mach overlay on my other dynomotion machine.)

But my 3 Ed dynomotion machine is seeing a lot of use already.  In alt tabing between screens I shut down the interface.  

So question is.  Is there a confirm on exit option some where for the kmotion program to prevent accidental closing?  

Thanks
Group: DynoMotion Message: 14367 From: Wcarrothers Yahoo Date: 1/23/2017
Subject: Re: Confirm on exit
Just get punchy. I was not saying I alt tabbed and closed it. I for sure clipped the corner of the interface screen and killed it with the mouse in the process.  

Did that with one of my techno machines and fixed the confirm on exit with their interface and figured the same here. 

Not trying to request useless features or anything.  And really just an Occasional time I do this and I have limit switches so not like I can't re align the machine. And perhaps the k retains that anyway and would inform the interface where it was when it comes back anyway.  

The "are you sure" screen Was on one of my early programs in Vb 20 years ago.  Became  a big joke around the office for years.  

But for this I tend to like it.  When I saw the on exit drop down figured it might be hidden in that. 

B



On Jan 23, 2017, at 9:31 AM, Tom Kerekes tk@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:

 

Hi Bill,

I suppose we could add that. Its just a pain when you really want to exit. 

How is it that alt-tab exits?  That should just switch processes. 

Regards

TK

On Jan 22, 2017, at 2:41 PM, Wcarrothers Yahoo wcarrothers@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:

 

And yes I see the program exit option but of course those are cool options I just want a dialog to yes or no exit of the program so I can decide I didn't want to exit and go back in. 

B



On Jan 22, 2017, at 5:37 PM, Wcarrothers Yahoo wcarrothers@... [DynoMotion] <DynoMotion@yahoogroups.com> wrote:

 

  My 3rd dynomotion machine I'm running a lot already and with the kmotion Cnc interface.  (Yes I some times scratch my head why I run Mach overlay on my other dynomotion machine.)

But my 3 Ed dynomotion machine is seeing a lot of use already.  In alt tabing between screens I shut down the interface.  

So question is.  Is there a confirm on exit option some where for the kmotion program to prevent accidental closing?  

Thanks